Powercom vanguard - 6KVA 4200 watts

Minimum Order: 1

Available Stocks: 50

Weight: 40.00 kg/s

Dimension: 69.00 cm x 25.74 cm x 58.50 cm


₱ 131,100.00

No Reviews yet | Write a Review


Standard Delivery: No

Delivery Period: 3-5 days within Metro Manila and 5-7 days outside Metro Manila

(Note: Delivery period is dependent on Product Delivery)


Cash on Delivery not Available


Powercom vanguard - 6KVA 4200 watts

Features :

  • Double conversion on-line technology with 0.9 power factor
  • Input power factor correction (PFC)
  • Pure sine wave output with less than 3% T.H.D.
  • High efficiency mode selectable
  • Free-run mode setting
  • Active-fan operation dependant on load level to reduce noise and save energy
  • Protections for overload, short circuit, tele-communication, etc.
  • Emergency Power Off (EPO) protection
  • Remaining backup time display via LED or LCD (optional)
  • Extended backup time with battery pack

    Specification

    MODEL

    VGS-10K

    CAPACITY

    10000VA

    4200W

    INPUTVoltage

    220V / 230V / 240V
    120V to 139V under 25% load, 140V to 159V under 50% load, 160V to 179V under 75% load, 180V to 276V with 100% load

    Frequency

    50Hz / 60Hz ±2.5Hz auto sensing (45Hz to 65Hz user selectable)

    Phase

    Single phase

    Power factor

    > 0.97

    OUTPUTVoltage

    220V / 230V / 240V ±2% (selectable output voltage)

    Frequency

    50Hz / 60Hz ±0.25Hz

    Waveform

    Pure sine wave

    Phase

    Single phase

    Harmonic distortion

    < 3% of T.H.D. at linear load

    Efficiency

    Approximately 89%

    Connections

    *Please refer below "Receptacle Options". Customized receptacle can be discussed.

    PROTECTIONOverload protection

    UPS automatic power off if overload exceeds 106% to 120% of nominal at 30 seconds; 121% to 150% for 10 seconds

    Short circuit protection

    UPS output cut off immediately or protected by input fuse or circuit breaker

    Tele-communication

    RJ45

    Alarm

    Buzzer beeps under backup mode, battery low,  battery charging fault, and overload

    BATTERYType

    Sealed, maintenance-free lead acid battery

    Typical recharge time

    4 hours to 90%

    Battery quantity

    12V 9Ah x20

    Backup time (100% load)

    3 to 4 minutes

    Protection

    Battery low cut-off without draining any current

    GENERALDimension (W x D x H)

    257.4 mm x 690mm x 585mm

    Product weight

     

    Display (LED/LCD)

    LED - line mode (green), bypass / battery mode (yellow), fault (red)
    LCD - input / output voltage and frequency, on-line mode, backup mode, battery capacity, load level

    Communication interface

    96.5kg(212.6lb) 

    Audible noise

    < 60dBA (1m from surface)

    Ambient temperature

    +0 °C to +40 °C

    Storage temperature

    -20 °C to +50 °C

    Humidity

    0-95%, non-condensing

     

    Communication Interface

    Model

    LCD

    CPU

    SNMP

    PFC

    RS-232

    USB

    VGS-10K

    ●Standard Function  ○Not Available   ◆Optional

     

    Receptacle Options